Multi-axis X-Y linear motorized positioning stage
ABTechinc's Mini X-Y Linear Motor stage combines Copley Controls,
Thrust
Tube "Micro" series linear motors with non-contact linear encoders
and precision
mechanical guideway bearings to produce a unique lightweight,
low mass and low
profile, linear motor positioning stage.
This design incorporates the linear motors
coil (forcer) as the stages workholding carriage while the linear mechanical
guideway bearings provide load support, travel straightness and
orthogonality
for accurate positioning and repeatability.
The Thrust
Tube linear motors
are electrically identical to conventional brushless DC
motors making them
compatible to most third party brushless
drives.
These mini X-Y stages
are ideally suited for pick-and-place
or point-to-point positioning applications
such as biomedical sample
handling or inspection.
ABTech's modular design approach and full
engineering services can
respond quickly to provide a solution to your O.E.M.
needs for
ultra-precision linear motion.
Features
- Thrust
Tube "Micro" series brushless DC linear motors - Precision linear mechanical guideway bearings
- Non-contact linear encoders
- Position accuracy & repeatability: ±0.000080" (±2.0µm)
- Motor
drive amplifiers - Motion
controllers - Custom
bases - Complete turn-key systems
- Modular
design
We are a manufacturer of industrial ultrasonic testing equipment most commonly used in the petrochemical, aerospace, automotive, and other generally related industries. The pages that follow will provide you with general information regarding our products. If you have any questions, need technical support, or have a request for custom items, please contact us at your leisure using the information provided on this site.
Our products are commonly used to determine the thickness of a variety of materials by making contact with only one side of the material being tested. They have the ability to detect very fine pits, flaws, and porosity in materials without having to destroy the material or parts being tested. This is done by converting the transit time of a sound wave, sent into and reflecting back from a defect or opposite surface in the test material, into a length measurement. This technique uses principles similar to that of sonar.
We also manufacture a line of ultrasonic bolting equipment that very accurately measures the stress, elongation, and load in threaded fasteners. These products are typically used in critical bolting applications where extreme accuracy is needed. If you have any specific or specialized bolting applications in mind, be sure to contact us to discuss your requirements in detail.
Enjoy!
Established in 1998, Norkom Technologies is a leading provider of financial crime and compliance software solutions to the global financial services industry. We enable financial organizations to detect and combat financial crime, control defenses and evolve strategies against fraud, money laundering and other types of financial crime.
Deployed in more than 100 countries across four continents, our financial crime and compliance solutions monitor millions of transactions a day for global financial services clients. Our ever-expanding client base includes six of the top ten financial services organizations in the world.
By combining a unique investigative technology platform with deep domain expertise and extensive client experience, Norkom has established a solid track record of reducing financial losses, protecting users’ reputations and improving operational efficiencies.
Norkom has been recognized as market leader by industry commentators such as Celent, who described Norkom as “one of the few vendors that offer a comprehensive product suite that provides all essential components of an AML compliance solution.”
Named Vendor of the Year by Compliance Reporter in 2008, Norkom has received many industry accolades spanning the spectrum of Anti-Money Laundering and Fraud, such as: ‘Best AML Solution’ in Banking Technology’s Readers’ Choice Awards for two years running (2008 and 2007) and ‘Best Technology Solution’ in Complinet’s compliance awards.
In June 2006, Norkom became a publicly quoted company on the Irish Stock Exchange (IEX: NORK.IE) and London Stock Exchange (AIM: NORK:L) following a successful IPO and supported by several years of significant revenue growth and constant profitability. These listings paved the way for the acquisition of US-based Digital Harbor in July 2007, which further extended the company’s footprint into the North American marketplace. In 2007, Norkom entered the Asia-Pacific financial crime and compliance market, becoming the dominant leader in Australia within a 12 month period.
On 11 November 2008, the company announced its half-year interim results to September 30, 2008, reporting a 37% increase in revenue and a 30% improvement in EBITDA. In the same month, Norkom joined the ranks of the world's top 100 providers of Financial Technology in the Fintech 100 rankings as a result of strong revenue and increasing market share in the battle against financial crime.Norkom is headquartered in Dublin, Ireland, with operations and offices across Continental Europe, North America and Asia-Pacific. s a leading provider of financial crime and compliance software solutions to the global financial services industry. We enable financial organizations to detect and combat financial crime, control defenses and evolve strategies against fraud, money laundering and other types of financial crime.
Deployed in more than 100 countries across four continents, our financial crime and compliance solutions monitor millions of transactions a day for global financial services clients. Our ever-expanding client base includes six of the top ten financial services organizations in the world.
By combining a unique investigative technology platform with deep domain expertise and extensive client experience, Norkom has established a solid track record of reducing financial losses, protecting users’ reputations and improving operational efficiencies.
Norkom has been recognized as market leader by industry commentators such as Celent, who described Norkom as “one of the few vendors that offer a comprehensive product suite that provides all essential components of an AML compliance solution.”
Named Vendor of the Year by Compliance Reporter in 2008, Norkom has received many industry accolades spanning the spectrum of Anti-Money Laundering and Fraud, such as: ‘Best AML Solution’ in Banking Technology’s Readers’ Choice Awards for two years running (2008 and 2007) and ‘Best Technology Solution’ in Complinet’s compliance awards.
In June 2006, Norkom became a publicly quoted company on the Irish Stock Exchange (IEX: NORK.IE) and London Stock Exchange (AIM: NORK:L) following a successful IPO and supported by several years of significant revenue growth and constant profitability. These listings paved the way for the acquisition of US-based Digital Harbor in July 2007, which further extended the company’s footprint into the North American marketplace. In 2007, Norkom entered the Asia-Pacific financial crime and compliance market, becoming the dominant leader in Australia within a 12 month period.
On 11 November 2008, the company announced its half-year interim results to September 30, 2008, reporting a 37% increase in revenue and a 30% improvement in EBITDA. In the same month, Norkom joined the ranks of the world's top 100 providers of Financial Technology in the Fintech 100 rankings as a result of strong revenue and increasing market share in the battle against financial crime.Norkom is headquartered in Dublin, Ireland, with operations and offices across Continental Europe, North America and Asia-Pacific.
Wood has been a favorite siding material through several decades. Whether it is vertical siding like board and batten, or horizontal siding like clapboards, shakes, and shingles, there are a few species and grades that are commonly used for all applications.
Before deciding on a siding material, definitely ask questions about rot resistance, splitting, checking, or cupping. A good rule is that you should buy the best grade of siding you can afford. Look for clear grains whenever possible, and make certain that the wood acclimates on site, is properly sealed, and is thoroughly protected upon installation.
When using wood, you can choose between several materials. Most common ones are: pine, spruce, cedar, and redwood.
Pine holds a finish well, and is preferable when painting or staining horizontal siding. Spruce comes in longer lengths than pine, and has many of the same characteristics. Cedar is known for its grain and its rot resistance. It is also straight, and resists splitting very well. Redwood is a good choice for siding in all climates. It resists shrinking, so it holds its profile and keeps its joints with little warping or cupping.
Prices vary greatly and it depends on the market. Because of the fact that some woods cannot be harvested as quickly as others, the supply is naturally lower and this results as higher price for some types of wood.
 |
| Catalyst recipe: Carbon black, iron acetate and a red or white filler material are used to make the final catalyst. Credit: Science |
A new catalyst based on iron works as well as platinum-based catalysts for accelerating the chemical reactions inside hydrogen fuel cells. The finding could help make fuel cells for electric cars cheaper and more practical.
Fuel cell researchers have been looking for cheaper, more abundant alternatives to platinum, which costs between $1,000 and $2,000 an ounce and is mined almost exclusively in just two countries: South Africa and Russia. One promising catalyst that uses far less expensive materials--iron, nitrogen, and carbon--has long been known to promote the necessary reactions, but at rates that are far too slow to be practical.
Now researchers at the Institut National de la Recherche Scientifique (INRS) in Quebec have dramatically increased the performance of this type of iron-based catalyst. Their material produces 99 amps per cubic centimeter at 0.8 volts, a key measurement of catalytic activity. That is 35 times better than the best nonprecious metal catalyst so far, and close to the Department of Energy's goal for fuel-cell catalysts: 130 amps per cubic centimeter. It also matches the performance of typical platinum catalysts, says Jean-Pol Dodelet, a professor of energy, materials, and telecommunications at INRS who led the work.
The improvement, reported in the latest issue of the journal Science, is "quite surprising," says Radoslav Adzic, a senior chemist at Brookhaven National Laboratory in Upton, NY, who also develops catalysts for fuel cells. The new material meets a benchmark for hydrogen fuel cells set five years ago that "we thought nobody would ever meet," adds Hubert Gasteiger, a visiting professor of mechanical engineering at MIT. "For the very first time, a nonprecious metal catalyst makes sense."
The INRS researchers' key insight was finding a way to increase the number of active catalytic sites within the material--with more sites for chemical reactions, the overall rate of the reactions in the material increases. In previous work, the researchers had shown that heating carbon black (a powdery form of carbon similar to graphite) to high temperatures in the presence of ammonia and iron acetate created gaps in the carbon that are just a few atoms wide. Nitrogen atoms bind to opposite sides of these tiny gaps, and an iron ion bridges these atoms, forming an active site for catalysis.Add Scanning Capabilites to Your Huntron Tracker Model 30 System
Adding
a Huntron® Scanner to your Tracker Model 30 system lets you access components
using standard DIP clips and cables, custom cables to PCB connectors or
interface to a bed-of-nails.You can compare one component with another in
real-time (64 pins max.) or use your PC to automate testing and scan up to 128
pins.Huntron Scanners can be used with a Huntron Access Prober to provide Common
line connections while the Prober is probing a PCB. This method gives you up to
128 selectable Commons to use. For example, you can connect the Scanner to a
connector on a PCB mounted in the Prober using a common ribbon style cable.
While the Prober is probing, any one of the lines on the connected ribbon cable
can be selected as the Common reference. This would provide you true
point-to-point testing capabilities.Note: The ProTrack Scanner will be replaced
by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to
commercial sales only.Scanner II and Scaner 31S users may want to consider these
Optional Accessories to enhance their test
capabilities.
Highlights:Desing By kuzey....
The Scanner II and Scanner
31S accessories add scanning capability to the Tracker Model 30
All Scanners
have a minimum 64 pin capability
The Scanner II can scan up to 128 pins when
the A and B channels are combined
The Scanner 31S use standard IDC style
connectors
The Scanner II uses the common SCSI-2 (68 pin) style connectors
Up to 8 Scanner IIs can be “daisy-chained” to increase the available number
of test pins
Selecting Accessories for your Scanner IIThe Scanner II
accessories for interfacing to your printed circuit board come "ala carte". This
means that you select the accessories you want included with your Scanner.
Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter
required with Scanner II) or a mutli-pin breakout cable. Details on these
accessories are provided on this page
By continuously measuring surface tension, the OL-55 monitors the level of surface active chemical additives in water-based process liquids. Based on the information from the measurement the operator can either manually dose chemicals into the process or the optional auto-dosing system can be used.
On-line tensiometer
- Continuous monitoring of surface tension and other parameters, including pH, temperature, and conductivity, in various process liquids for optimising the dosing of chemicals
- Rugged design for factory applications
- Fully automatic computer controlled operation
- Patented technology
Benefits
- Eliminates overdosing of surfactants - reducing costs
- Controls processes - improves efficiency and quality
- Reduces waste and improves yield
- Improves environmental control
- Extends chemical lifetime in processes
| Specifications | ||
| Surface tension measuring range | 20 to 80 mN/m | |
| Resolution | 0.1 mN/m | |
| Update time for liquid | 3 minutes from change in process liquid | |
| Temperature measuring range (optional) | 15 to 85°C | |
| pH measuring range (optional) | 2 to 14 | |
| Flow rate | 18 l/h | |
| Self-cleaning filter | Standard 100 μm (others by request) | |
| Voltage | 100-240 V (automatic) 50/60 Hz | |
| Power consumpiton | < 60 W | |
| Fuses | 315 mA | |
| Dimensions | 544 x 428 x 236 mm (H x L x D) | |
| Optional features | ||
The GoldTier product incorporates all of the functionality required to effectively:
- Manage the onboarding and maintenance of new and existing clients across a variety of teams including sales, relationship managers, operations, compliance, documentation, tax, credit and legal
- Integrate compliance controls into the client onboarding process
- Deliver Know Your Customer (KYC / AML), Customer Identification Profile (CIP), MiFID client classification, USA PATRIOT Act, and related client regulatory due diligence
- Create transparency to stakeholders throughout the client lifecycle.
'GoldTier is creating a standard to address both the tactical and strategic challenges arising from the processes of client onboarding.' HSBC
The solution empowers financial institutions to:
- Meet regulatory compliance demands: with automated due diligence processing and comprehensive client audit profiles on-demand
- Improve time to revenue: with the reduction in paperwork and tightening of account opening cycle times
- Control costs: with the automation of manual tasks, elimination of expensive repeat tasks, and real-time management dashboards
- Enhance the client experience: with the minimization of touch points and repeat requests to your clients.
Each onboarding activity is tied back into a common onboarding framework, meaning client knowledge can be leveraged across all activities. GoldTier enables financial institutions to set policies, adopt regulations and then implement and enforce them throughout these activities.
To receive a complimentary copy of the GoldTier KYC and Client Onboarding Solution brochure with key client commentary please select Contact Us from the menu on the right.
Direct drive brushless DC servo motor
- Precision ground ABEC-7 4-point contact bearings
- Durable stainless steel top plate with through hole
- Resolution to 0.2 arc seconds
- Highly repeatable Hall effect home and limit switches
- Optional encoder scale cover
- Ideal for:
- Wafer Inspection
- Precision Assembly
- Laser Machining
Low Profile Direct Drive Rotary Stage
Anorad's new DDR-150 rotary positioning stages are designed for precise position and velocity control in light to medium force applications. High performance is achieved through use of a brushless DC servomotor, high resolution optical encoder and precision bearing set all housed in a compact and precisely machined aluminum base with a rugged stainless steel top plate.
The direct drive servo control of the brushless DC motor has several advantages over conventional gear driven rotary stages. Backlash is eliminated, torque variation is minimized, plus gear and brush wear are no longer factors in long term usage. Added benefits include speeds up to 360 rpm, 0.2 arc second resolution and ±1 arc second repeatability. Step-and-settle time is also reduced due to increased servo bandwidth.
Available options for the DDR-150 include a variety of encoder resolutions to meet your speed and accuracy requirements. An axial through hole for use with pneumatic or optical devices; adjustable home, limit and hardstop positions; and a sheet metal cover to protect the encoder and internal components.
Specifications
| Parameter | Specification | Parameter | Specification |
|---|---|---|---|
| Travel | unlimited | Maximum Velocity2 | 1273 rpm |
| Accuracy | ±20 arc sec | Acceleration | 34 rad/s2 |
| Repeatability1 (bi-directional) | ±1 arc sec | Axial Capacity | 25 kg |
| Resolution1 | 0.214 arc sec | Axial Runout (TIR) | 5 µm |
| Stability | ±2 counts | Radial Runout (TIR) | 5 µm |
| Minimum move1 | 0.5 arc sec | Wobble3 | ±8 µm |
| Peak Torque | 7.4 Nm | Thru Hole diameter | 35 mm |
| Continuous Torque | 1.4 Nm | Concentricity (Thru hole) | ±2 µm |
| Inertia | 0.217 kg-m2 | Stage Weight | 3.5 kg |
| DDR-150 Construction | Mechanical Features |
|---|---|
| Stationary Base | High strength aluminum alloy with black anodized finish (Nickel plating optional) |
| Rotating Table | Stainless steel with passivated finish |
| Bearing System | ABEC-7 precision ground 4-point contact radial bearing |
| Encoder | Incremental optical encoder with reflective tape scale (50 lines/mm) |
| Limit Switches | Hall effect home and limit switches |
- With 0.214 arc sec resolution (256x multiplication)
- At lowest resolution (top speed dependent on controller and resolution)
- Measured at 60mm radius
Custom Stack Analysis, LLC., was originally established in Alliance, Ohio, in 1965 by Mr. Ernest Kolm. In the year 2000, the company was acquired by Mr. James K. Gray, who has over 18 years experience in the field of air emissions testing. In the year 2005 Custom Stack Analysis, LLC. acquired the source testing assets of Envisage Environmental, Inc. Custom Stack Analysis, LLC. has capabilities for performing Stack Testing, Industrial Hygiene, Analytical Services, Burner Combustion Efficiency, Radon Testing and Indoor Air Quality. The company has performed work not only for small companies, but also many fortune 500 companies. A professional staff can ensure that any of your environmental needs are met with quality and competitive pricing.
Custom Stack Analysis, LLC., has been providing air emissions testing for the past 38 years. In this time, they have performed testing for many prominent clients, such as Stericycle, Inc., Goodyear Tire & Rubber Co., and WCI Steel, along with many other prominent companies. The company has extensive knowledge in testing for medical waste incinerators, printing operations, steel foundries, asphalt facilities, power plants, petroleum refineries, chemical plants, brick manufacturers, lumber processing, hazardous waste incinerators, rubber manufacturing, roofing production, plastic manufacturers, and many other types of operations. The company has also been providing its services to engineering companies, government agencies, and control system designers. The company has experience providing services internationally including Canada, Puerto Rico, Jamaica, Dominican Republic, Caribbean Islands and South America. If you have an international project that requires our services be sure to give us a call. In 2009 Custom Stack Analysis, LLC. joined a service alliance with Zaff International/Hi-Tech Ltd. for providing services in Saudi Arabia and the Gulf Coast countries.
Custom Stack Analysis, LLC., has an excellent performance reputation in working with many prominent Clients in Ohio and throughout the United States. The company is noted for its ability to deliver quality services in accordance with project schedules, and to provide responsive assistance to Clients in emergency situations.
Custom Stack Analysis, LLC., has a company policy of providing high quality services to clients. The company also has a strong commitment for safety on the job for its work force, which includes USEPA's safety, health, and environmental management training program for field activities for all employees.
Custom Stack Analysis, LLC., is an active member in the Air & Waste Management Association, Source Evaluation Society, Ohio Chamber of Commerce, and Carolina Air Pollution Control Association.
<- :: Sonraki Sayfa ->